Three Phase MIG, 270A - 510A
MULTIMIG 273CS, 333CS, 413CS & 513CSHeavy duty Inverter MIG, with 4 roll wire drive, MMA ARC welding & DC TIG, real industrial machines built to work hard for 25+ years. Simple to use but packed full of features to provide superior welding performance with ultra low power consumption. One power source covers both compact & SWF MIG. Simply plug in our 4X wire feeder & you have SWF MIG!
Guarenteed better welding performance than any traditional transformer MIG! Low spatter, instant arc starts, infinate control of output to 1A & 0.1V. Despite the performance benefits these are even simpler to set & use than our old transformer based machines & are a real joy to weld with. Weld anything from the thinest car panels up to structual steel buildings & large earth moving equipment for the biggest models.
MULTIMIG 273CS Heavy duty compact inverter MIG + MMA ARC + DC TIG. RRP £1590+VAT
|
Accessories; 4X MIG wire feeder - just plug in & you have SWF MIG. MIG torches up to 5M, MMA electrode leads, TIG torch with switch & gas control. OXFORD SG24 & SG36 pool gun - even better performance for aluminium work.
MULTIMIG 333CS Heavy duty compact inverter MIG + MMA ARC + DC TIG. RRP £1790+VAT
|
Accessories; 4X MIG wire feeder - just plug in & you have SWF MIG. MIG torches up to 5M, MMA electrode leads, TIG torch with switch & gas control. OXFORD SG24 & SG36 spool gun - even better performance for aluminium work.
MULTIMIG 413CS Heavy duty compact inverter MIG + MMA ARC + DC TIG. RRP £2090+VAT (standard air cooled machine)
|
Options (to specify at time of order); Water cooling with flow protection & on demand control.
Accessories; 4X MIG wire feeder - just plug in & you have SWF MIG. MIG torches up to 5M, MMA electrode leads, TIG torch with switch & gas control. OXFORD SG24 & SG36 spool gun- even better performance for aluminium work.
MULTIMIG 513CS Our most powerful model. RRP £2370+VAT (standard air cooled machine)
|
Options (to specify at time of order); Water cooling with flow protection & on demand control.
Accessories; 4X MIG wire feeder - just plug in & you have SWF MIG. MIG torches up to 5M, MMA electrode leads, TIG torch with switch & gas control. OXFORD SG24 & SG36 spool gun- even better performance for aluminium work.
MULTIMIG 4X wire feeder. |
MULTIMIG CS models with 4X wire feeder
Machine can be used as a compact MIG & SWF MIG. Set up with two different welding wires & torches then switch between welding different materials in seconds.
The following MIGMAKER, I-MIG & S-MIG models are no longer available due to Gov & EU ECODESIGN regulations.
Compact & separate wire feed models (step voltage machines)
There has never been a better time to buy British! With the weak British £ our machines are more competitive than any similar quality imported machine & with the OXFORD long term back up buying British has to be the wise choice.
Compare our three phase MIG range with competitors & you will see we offer much more all round. Higher duty cycles, lower input power requirements, better long term support, better pricing & all made right here in the UK!
MIGMAKER range 270A-330A
Our best selling MIG range.
All models are built with a copper wound main transformer, rugged switch gear, over rated rectifier & fan cooling all built onto a 2.0mm steel chassis. This ensures these machine combine great welding performance with the best long term reliability.
The MIG wire is loaded just under the lid giving much better access for the operator. OXFORD cap+ technology ensures a very smooth weld condition on all materials, steel stainless, aluminium etc. Our simple yet robust PCB precisely controls all functions including super smooth motor speed control, motor braking & burn back control with adjustment possible. A good range of carefully chosen voltage steps are fitted to these models so you get the setting you need for any job. All MIGMAKER models now start at 20A ideal for everything from the thinnest material upwards, allowing you to weld all car panels right up to heavy plate.
Like all OXFORD models our energy efficient design means lower operating costs.
Rugged reliable compact MIG machines with simple no nonsense controls. Great welding performance, simple build & easy maintainance, everything you want from a machine designed to weld & nothing you dont want. 1000's sold over the last few years!
MIGMAKER 270-3 - 400V general fabrication, maintenance & light to medium agricultural work. Now with 20A minimum setting allows you to weld everything from the thinnest car panel upwards. RRP £960+VAT
|
Standard features; Infinitely variable wire speed control, built in electronic motor brake & burn back with adjustment. 2 roll all geared all metal wire drive system. Energy efficient design. Oxford Cap+ technology ensures a very smooth stable arc, with the best arc starting.
Options; Torch trigger latching, reverse polarity function for running gasless wire, spool gun & push pull gun for aluminium.
RRP £1050+VAT
|
Standard features; Infinitely variable wire speed control, built in electronic motor brake & burn back with adjustment. 2 roll all geared all metal wire drive system. Energy efficient design. Oxford Cap+ technology ensures a very smooth stable arc, with the best arc starting.
Options; Torch trigger latching, reverse polarity function for running gasless wire, spool gun & push pull gun for aluminium.
**********************************************************************************
I-MIG range 330A-470A
The I-MIG range are our high power very heavy duty compact MIG range.
All I-MIG models are built with a copper wound main transformer, rugged switch gear, over rated rectifier & double fan cooling all built onto a 2.5mm steel chassis. Built the way all machines should be to give you a really long life span.
The MIG wire is loaded just under the lid giving much better access for the operator. OXFORD cap+ technology ensures a very smooth weld condition on all materials, steel, stainless, aluminium etc. Our simple yet robust PCB precisely controls all functions including super smooth motor speed control, motor braking & burn back control with internal adjustment possible. All are fitted with a 100% metal 4 roll drive system to give the best wire feeding. A good range of voltage steps are fitted to these models. Like all OXFORD models our energy efficient design means lower operating costs.
Rugged reliable compact MIG machines with simple no nonsense controls. Great welding performance, simple build & easy maintainance, everything you want from a machine designed to weld & nothing you dont want.
I-MIG 330-3 - 400V Industrial compact MIG c/w 4 roll drive. Ideal for medium duty fabrication, maintainance work, medium to heavy agricultrual welding. Now with 20A minimum setting allows you to weld everything from the thinnest car panel upwards. RRP £1120+VAT
|
Standard I-MIG features; Infinitely variable wire speed control, built in electronic motor brake & burn back with internal adjustment. Energy efficient design. Oxford Cap+ technology ensures a very smooth stable arc, with the best arc starting. Very low minimum of 20A on 330-3.
Options; Digital meter kit, calibration for EN1090, upgrade to give torch trigger latching, reverse polarity, spool gun & push pull gun for aluminium.
I-MIG 410-3 - 400V industrial compact MIG c/w 4 roll drive. Ideal for everything from sheet metal upwards. For medium to heavy duty fabrication & repair work. A powerful machine with a high duty cycle. RRP £1250+VAT
|
Standard I-MIG features; Infinitely variable wire speed control, built in electronic motor brake & burn back with internal adjustment. Energy efficient design. Oxford Cap+ technology ensures a very smooth stable arc, with the best arc starting.
Options; Digital meter kit, calibration for EN1090, upgrade to give torch trigger latching, reverse polarity, spool gun & push pull gun for aluminium.
I-MIG 470-3 - 400V Industrial compact MIG c/w 4 roll drive. Possibly the most powerful compact MIG you can buy. Ideal for for everything from sheet metal work to really heavy duty fabrication. RRP £1420+VAT
|
Standard I-MIG features; Infinitely variable wire speed control, built in electronic motor brake & burn back with internal adjustment. Energy efficient design. Oxford Cap+ technology ensures a very smooth stable arc, with the best arc starting.
Options; Digital meter kit, calibration for EN1090, upgrade to give torch trigger latching, reverse polarity, spool gun & push pull gun for aluminium.
****************************************************************************
S-MIG range 270A-470A synergic
Our really popular separate wire feed range of MIG machines.
Great welding performance & synergic control of wire speed makes these models a pleasure to use.
All models are built with a copper wound main transformer, rugged switch gear, over rated rectifier & fan cooling all built onto a strong 2.0mm steel chassis. Built for performance, reliability & importantly a long life.
OXFORD cap+ technology ensures a very smooth weld condition on all materials, steel, stainless, aluminium etc. Our simple yet robust PCB precisely controls all functions including super smooth motor speed control, motor braking & burn back control with adjustment possible. We fit the PCB in the power source to give the best reliability, the wire feeder then has no electronics at all fitted. A good range of carefully chosed voltage steps ensure you can achieve the setting needed for each job. The interconnector lead is fully sheathed & is fixed directly at the wire feeder end with a clamp to ensure pull damage doesnt occur. Like all OXFORD models our energy efficient design means lower operating costs.
To sum up these are rugged reliable MIG machines with simple no nonsense controls. Built to weld & keep welding for years & years!
S-MIG 270-3 + S-MIG 2x2 2 roll feeder + 5M intercon - light to medium fabrication, maintenance work, medium agricultural work. RRP £1180+VAT
|
Standard features; Very rugged & compact wire feed unit, synergic control means very easy to set & use, Oxford Cap+ technology ensures a very smooth stable arc with the best arc starting, electronic motor brake & burn back fitted, torch trigger latching fitted, very energy efficient design.
Options; Digital meter kit, calibration for EN1090, spool cover, Upgrade to 4x4 wire feed, Upgrade to 10M, 15M or 20M intercon, interconnector extensions, spool gun & push pull gun for aluminium.
S-MIG 330-3 + S-MIG 4x4 4 roll feeder + 5M intercon - medium duty fabrication, maintenance work, medium to heavy agri welding. RRP £1350+VAT
|
Standard features; Very rugged & compact wire feed unit, synergic control means very easy to set & use, Oxford Cap+ technology ensures a very smooth stable arc with the best arc starting, electronic motor brake & burn back fitted, torch trigger latching fitted, very energy efficient design.
Options; Digital meter kit, calibration for EN1090, spool cover, Upgrade to 10M, 15M or 20M intercon, interconnector extensions, spool gun & push pull gun for aluminium.
S-MIG 410-3 + S-MIG 4x4 4 roll feeder + 5M intercon - Ideal for all jobs from thin sheet up to medium to heavy duty fabrication of H beams, buckets etc. RRP £1490+VAT
|
Standard features; Very rugged & compact wire feed unit, synergic control means very easy to set & use, Oxford Cap+ technology ensures a very smooth stable arc with the best arc starting, electronic motor brake & burn back fitted, torch trigger latching fitted, very energy efficient design.
Options; Digital meter kit, calibration for EN1090, spool cover, Upgrade to 10M, 15M or 20M intercon, interconnector extensions, spool gun & push pull gun for aluminium.
S-MIG 470-3 + S-MIG 4x4 4 roll feeder + 5M intercon - Ideal for all jobs from thin sheet right up to heavy duty fabrication, H beams, buckets etc. RRP £1680+VAT
|
Standard features; Very rugged & compact wire feed unit, synergic control means very easy to set & use, Oxford Cap+ technology ensures a very smooth stable arc with the best arc starting, electronic motor brake & burn back fitted, torch trigger latching fitted, very energy efficient design.
Options; Digital meter kit, calibration for EN1090, spool cover, Upgrade to 10M, 15M or 20M intercon, interconnector extensions, spool gun & push pull gun for aluminium.
All Oxford MIG models are built in compliance with with BS EN60974-1, BS EN 60974-10, RoHS, weee registered & CE marked.
Every Oxford welding machine is offered with the following guarantees:
2 year warranty all items
5 year main transformer warranty (the heart of the machine)
20 year minimum guarantee of spares availability
Addition models & functions are available on request